(803) 536-5500
Call Now!

(866) 687-7495
Call Now!

Tire Maintenance

Proudly Serving Orangeburg, SC at Murphy's Auto Glass & Tire Express

Tire Maintenance for Cars and Trucks

Your tires are a significant investment in your vehicle, and like any investment, you want to get the most value from them. Tires carry a range of mileage warranties set by the manufacturer, and each warranty reflects how long the tire should last under normal driving conditions with proper care. As a vehicle owner, there are several steps you can take to help your tires reach their full life expectancy.

 
 

 

Keep Tires Properly Inflated by Checking Pressure Regularly

Under normal use, tires typically lose about 1 psi (pound per square inch) each month. Keeping your tires at the correct pressure not only extends their life but also helps your vehicle achieve better gas mileage and a more comfortable ride. Checking pressure is simple and takes only a couple of minutes per tire. Be sure your gauge matches the vehicle's tire specifications, which are usually found on a sticker inside the driver's side door. If you choose to fill your tires with nitrogen, you won't need to check pressure as often, since nitrogen escapes less easily than compressed air—but checking consistently is still a smart habit.

Steps for Checking Tire Pressure

  • Get a reliable pressure gauge.
  • Check tires when they are "cold"—before driving or at least three hours after you've driven.
  • Insert pressure gauge into the valve stem on your tire. (The gauge will "pop" out and show a measured number. When you hear a "pssst" sound, air is escaping the tire. The escaping air shouldn't affect pressure substantially, unless you hold down the air pressure gauge too long.)
  • Compare the measured psi to the psi listed on the sticker inside your driver's door or in your owner's manual. DO NOT compare it to the psi on the tire's sidewall.
  • If your psi is higher than the number, release air until it matches. If it's lower, add air until it reaches the correct level.

 

Rotating Your Tires

Rotating your tires regularly helps them last longer and perform better. During a rotation, each tire and wheel is removed and moved to a different position so that all tires wear evenly and last longer. Plan a rotation every six months or every 6,000 to 8,000 miles—often at each oil change.

 

Inspecting Your Tires

Use a penny to inspect your tire's tread.

Inspect your tires once a month and before any long road trip, checking for wear and damage. An easy way to check tread wear is the penny test—just grab some spare change and follow these three simple steps.

  1. Hold a penny with Abe's body between your thumb and forefinger.
  2. Find the spot on your tire where the tread looks lowest and insert Lincoln's head into one of the grooves.
  3. If the tread covers any part of Abe Lincoln's head, you have a legal and safe amount of tread. If your tread falls below that point (about 2/32 of an inch), your car's ability to grip the road in poor conditions is greatly reduced.

Whether you drive a car or a truck, a little routine attention goes a long way toward protecting your tire investment. Pairing regular pressure checks with timely rotations and tread inspections helps you stay safe and get the most from every mile. If you'd like help with rotation, balancing, or flat repair, Murphy's Tire Express in Orangeburg is here to assist.